e-catalogue Plastics e-catalogue Lined PRODUCTS Thermoplastic Manual Valve Fluoropolymer Lined Valve Thermoplastic Actuated Valve Fluoropolymer Lined Actuated Valve Thermoplastic Pipes Fluoropolymer Lined Pipes Speciality Valve	About Us Material Quality Hydrotest Pressure Chart Drilling Standards Contact Us General Properties Of Polymers Technical Properties Of Normal Polypropylene General Properties of Isotactic PP And Advantages Technical Data of PVDF Properties Of Fluorocarbon Resin General Properties of Isotactic PP And Advantages Physical Properties Unit Test Method Value Flow rate at 23°C-2. 16 Kgs. gms/10 mins. ISO-11 33 ASTM D1238/L 0.91   D1238/L   Specific Gravity at 23°C gm/cm3 ISO-1183 ASTM 0.90   D1505   HDT46N/cm2 °C ISO-75 ASTM A| 142   D-648 B| 92 HDT 185N/cm2 °C ISO-75 ASTM A| 64   EXM8 B| 50 Accelerated oven aging in air at 150°C (Natural Ventilation) hours ASTMD3012 1200 (2000) 10000 hrs. continous indoor service. Maximum allowable thermal limit. °C Extrapolation 117(120) Mechanical Properties at 23°C Flexural Modulus of elasticity daN/cm2 (kg/cm2) ISO-178 ASTM D790 A| 12,500 B| 12,500 Tensile strenght at yield daN/cm2 (kg/cm2) ISO-527 ASTM D638 A| 350 B| 330 Elongation at failure % ISO-527 ASTM D638 A| 80 B| 200 Rockwell hardness alpha ASTM/D 785/B A| 50 B| 50 Maximum stress daN (kg) DIN 53412 A| 265 B| 80 Recorded energy at break Joule DIN 53443 A| 18 B| 2.5 Izod impact strenght notched Joule/dm (kgcm/cm) ISO-180 ASTM D265 A| 50 B| 15 Izod impact strenght at 0°C unnotched Joule/dm (kg cm/cm) ISO-180 ASTM D265 A| 4 B| 2.5 Izod impact strenght at 20°C unnotched daN/cm2 (kgcm/cm2) ISO-180 ASTM D638 A| 2.5 B| 2 Izod impact strenght at 20°C unnotched daN/cm2 (kg cm/cm) ISO-180 ASTM D265 A| 100 Vicat softening point under 1kg/mm2 load °C ISO-306 ASTM D1525 A| 151 B| 150

All Rights Reserved. UNP Polyvalves.         Design Studio | Virtual Wonder Inc.